ADVANTAGES:
- Suitable for construction on many surfaces: Concrete, fiber cement, wood, galvanized steel, tiled floors (especially frequently wet floors).
- High elasticity, good surface adhesion.
- Good resistance to water stagnation and penetration.
- High heat resistance and UV resistance.
- Non-flammable, non-toxic.
- Easy to clean construction tools.

FIELDS OF USE:

GENERAL SMART waterproofing for roofs, terraces, toilet floors, balconies, seno, rainwater drainage ditches, outer walls, metal roofs, fibo-cement roofs, etc.

APPLYING INSTRUCTIONS:
Tools: Brush, roller or airless spray. 2-layer construction.

Mix GENERAL SMART thoroughly using a low speed mixer (300 rpm). Add colored powder (if available) and continue mixing for a few minutes. GENERAL SMART can be diluted with 5-10% water before application.

Ground and weather conditions:
Hardness on floor: R = 15 Mpa.
Moisture: W <10%.
Temperature: 5-35 ° C. Relative humidity: <85%.

Quota:
• Application by roller or brush:
1. First layer: 0.6-0.8 kg / m².
2. Second layer: 0.6-0.9 kg / m².
• Construction by airless spray: 0.5 kg / m² per layer.
Norm: 1,2-1,5 kg / m²,
For use as a protective paint, the recommended consumption level is 0.5 Kg / m².

Note: Apply the first layer, wait for it to dry before applying the second layer. The second coat is applied perpendicular to the first layer.

The drying time in each class is from 2 to 8 hours depending on the weather conditions at the construction site.

STORAGE: Can be kept for at least 12 months in unopened boxes, store in a dry place and at a temperature of 5-25 ° C. After opening, use as soon as possible. Avoid storing in very cold weather (freezing temperature).
PRESENTATION: 12kg / drum

TECHNICAL SPECIFICATIONS

In liquid form (before application):
70% active substance.

In cured form (after application):